OmniTek Ultra XR, Руководство пользователя

Страница: 19 / 184

Ultra XR User Guide 1–7 XR-56-201 5
Ov
er
vie
w
Overview
User Interface
Power On
The unit is turned on using the front panel button. When pressed the surround will turn green to
indicate that the unit is on and after about 30 seconds the user interface should appear on the local
interface screen (HDMI by default). The unit's web server will also start up to allow the unit to be
controlled using a web browser.
Power Button
Local User Interface
The Ultra 4K XR can be controlled locally using the HDMI output and a mouse/keyboard connected
directly to the rear of the unit.
The local interface provides full resolution images, waveforms and real time display updates.
On power-up the Ultra will automatically route the user interface to any connected HDMI monitor. A
confirmation box is displayed to allow this connection link to be made in the
Connections
menu.
Note that all Viewer tiles are available at full resolution on the local user interface and where
applicable are available via web browser at low resolution and lower refresh rate.
Web-browser User Interface
The Ultra 4K XR can be controlled via a web browser such as Chrome, FireFox or Internet Explorer.
The web-browser interface provides browser resolution images, waveforms and the display is updated
every few seconds. Some functionality is not available on the web-browser interface and this is
indicated in this document.
The web server within the Ultra 4K Tool Box can be accessed via a network by entering the unit's IP
address or “Machine Host Name” into the browser address field.
Units are factory configured to acquire an IP address from the network it is connected to using DHCP
but can be configured to use a static IP address.
On power-up the Ultra will automatically route the user interface to any connected HDMI monitor.
Selecting the “Configuration” menu from the user interface will display the current network IP Address
and the unit’s unique “Machine Host Name”.
See the "Web Browser Control" section in the Installation chapter for details about how to
locate the unit on the network.