OmniTek Ultra XR, Руководство пользователя

Страница: 134 / 184

5–14 XR-56-201 5 Connections 03/18
Connections
SDI Outputs Block
The SDI Outputs block represents
all of the possible SDI output
connections that make up the
video signal including single
link, dual link and quad link
connections. This block also sets
the SDI output format and frame
rate.
The input to this block can be connected directly from the Generator block, to allow SDI signal
generation, or can be connected from the Local User Interface block to provide the control system
user interface on an SDI monitor.
The SDI Outputs block provides the following functions:
Output Format
the SDI output format and frame rate can be selected from the

drop down
list of frequently used formats or by selecting settings icon to define specific
formats and frame rates.
Genlock
this allows the SDI output to be locked to the unit's locking reference signal
selected in the Genlock block. With Free Run selected the DisplayPort will be
unlocked.
Output 1 the first output can be selected from a choice of "AUX 3", "AUX 4", "SDI 1", "SDI
2", "SDI 3" or "SDI 4" physical connections.
Output 2 the second output can be selected from a choice of "AUX 3", "AUX 4", "SDI 1",
"SDI 2", "SDI 3" or "SDI 4" physical connections.
Output 3 the third output can be selected from a choice of "AUX 3", "AUX 4", "SDI 1", "SDI
2", "SDI 3" or "SDI 4" physical connections.
Output 4 the fourth output can be selected from a choice of "AUX 3", "AUX 4", "SDI 1",
"SDI 2", "SDI 3" or "SDI 4" physical connections.
Clicking on this icon next to the currently selected output format will display the
Video Standards Editor . Clicking on the icon next to the Genlock

drop down
will display the Genlock Timing Editor .