
Configuring AFP
Configuring Application Fingerprinting
page 28-14
OmniSwitch AOS Release 7 Network Configuration Guide
June 2013
Defining Application REGEX Signatures and Groups
To define a new application signature entry in the REGEX signature file, use the following formatting
conventions:
App-name:
application-name
Description:
application-description
REGEX-signature
Application signature formatting guidelines:
•
The application signature “Description:” field is optional, but the “App-name:” field and REGEX
signature are required.
•
Maximum characters allowed for the “App-name:” field is 24.
•
Maximum characters allowed for “Description:” field is 64.
•
REGEX signature guidelines:
>
Signature should be more than 6 characters but less than 256 characters.
>
Do not start the signature with the “^” character (because scanning starts at the beginning of the
packet not from the beginning of the packet payload).
>
The “.”, “*”, “?”, or any combination of the three characters may not work properly on hex value
data in the packet payload (for example, the .* may not work properly).
>
The . * ? represents any single character except carriage return (0xD) and tabs (0x9, 0xB) and may
not work with other non-character hex values.
>
Use /x hex notation when possible (for example, instead of "yahoo.com" use "yahoo/x2Ecom" in the
signature - ASCII value for . is 0x2E).
>
Be careful about using a space (white space) in the signature.
>
Do not use very complex set of REGEX notation, instead, break it down to multiple simple REGEX
signatures.
To define a new signature group in the REGEX signature file, use the following formatting conventions:
App-group:
app-group-name
=
application-name-1
application-name-2
application-name-3
...
Application signature formatting guidelines:
•
Maximum characters allowed for the “App-group:” field is 24.
•
Enter a list of application signature names (already defined in the signature file) after the “=” with a
space between each name
Содержание os6900
Страница 28: ...Contents xxviii OmniSwitch AOS Release 7 Network Configuration Guide June 2013...
Страница 374: ...VRF Route Leak Configuring IP page 15 40 OmniSwitch AOS Release 7 Network Configuration Guide June 2013...
Страница 692: ...Policy Applications Configuring QoS page 25 84 OmniSwitch AOS Release 7 Network Configuration Guide June 2013...