OmniSwitch os6900, Руководство по настройке сети, Страница: 649 / 942

Configuring QoS Configuring Global QoS Parameters
OmniSwitch AOS Release 7 Network Configuration Guide June 2013 page 25-41
If event forwarding is disabled, NMS applications can still query the QoS software for events, but the
events are not sent in real time.
Forwarding Log Events to the Console
QoS log messages can be sent to the switch logging utility, which is an event logging application
available on the OmniSwitch. The configuration of the switch logging utility then determines if QoS
messages are sent to a log file in the switch’s flash file system, displayed on the switch console, and/or
sent to a remote syslog server.
To send log events to the switch logging utility, enter the following command:
-> qos log console
To disable immediate forwarding of events to switch logging, enter the following command:
-> qos no log console
To activate the change, enter the qos apply command. For more information about the qos apply
command, see “Applying the Configuration” on page 25-71 .
Use the swlog output command to configure switch logging to output logging events to the console. Note
that this is in addition to sending log events to a file in the flash file system of the switch. See the “Using
Switch Logging” chapter in the
OmniSwitch AOS Release 7 Network Configuration Guide for more infor-
mation.
Displaying the QoS Log
To view the QoS log, use the show qos log command. The display is similar to the following:
**QOS Log**
Insert rule 0
Rule index at 0
Insert rule 1
Rule index at 1
Insert rule 2
Rule index at 2
Enable rule r1 (1) 1,1
Enable rule r2 (0) 1,1
Enable rule yuba1 (2) 1,1
Verify rule r1(1)
Enable rule r1 (1) 1,1
Really enable r1
Update condition c1 for rule 1 (1)
Verify rule r2(1)
Enable rule r2 (0) 1,1
Really enable r2
Update condition c2 for rule 0 (1)
Verify rule yuba1(1)
Enable rule yuba1 (2) 1,1
Really enable yuba1
Update condition yubamac for rule 2 (1)
QoS Manager started TUE MAR 10 13:46:50 2002
Match rule 2 to 1
Match rule 2 to 2
Match rule 2 to 3