OmniSwitch os6900, Руководство по настройке сети, Страница: 186 / 942

Modifying Dynamic Link Aggregate Group Parameters Configuring Dynamic Link Aggregation
page 8-20 OmniSwitch AOS Release 7 Network Configuration Guide June 2013
-> linkagg lacp port 2/5 actor system-priority 200
Restoring the Actor Port System Priority
To remove a user-configured actor port system priority from a dynamic aggregate group actor port
configuration use the
no form of the linkagg lacp port actor system-priority command by entering
no linkagg lacp agg , the slot number, a slash ( / ), the port number, and actor system priority .
For example, to remove a user-configured system priority from dynamic aggregate actor port 5 in slot 2
you would enter:
-> no linkagg lacp port 2/5 actor system-priority
Modifying the Actor Port Priority
By default, the actor port priority (used to converge dynamic key changes) is 0. The following subsections
describe how to configure a user-specified value and how to restore the value to its default value with the
linkagg lacp port actor port priority command.
Configuring the Actor Port Priority
You can configure the actor port priority to a value by entering linkagg lacp agg , the slot number, a slash
( / ), the port number, actor port-priority , and the user-specified actor port priority.
For example, to modify the actor port priority of dynamic aggregate actor port 1 in slot 2 to 100 you would
enter:
-> linkagg lacp port 2/1 actor port-priority 100
For example, to modify the actor port priority of dynamic aggregate actor port 1 in slot 2 to 100, enter:
-> linkagg lacp port 2/1 actor port-priority 100
Restoring the Actor Port Priority
To remove a user configured actor port priority from a dynamic aggregate group actor port
configuration use the
no form of the linkagg lacp port actor port priority command by entering
no linkagg lacp agg , the slot number, a slash ( / ), the port number, and no actor port priority .
For example, to remove a user-configured actor priority from dynamic aggregate actor port 1 in slot 2 you
would enter:
-> no linkagg lacp port 2/1 actor port-priority