OmniCell OmniRx, Руководство по обслуживанию

Страница: 36 / 52

3-2 Drawers
Matrix Drawers
OmniRx Service Guide /67-2023 Rev D © 2010 Omnicell, Inc.
Matrix Drawers
Bin Configuration
Unlit Matrix Drawers
Each unlit matrix drawer can contain a maximum of 96 bins (24 per quadrant). Customers can
utilize the flexibility of this drawer and custom-configure it to meet specific needs and
requirements for the site. As with other matrix drawers, the
dividers are designed to be snapped
off, enabling the bins to be custom-configured to fit site-specific needs.
Figure 3-1. Matrix drawer dividers
1. Make sure the customer has approved the layout of each drawer.
2. Break the divider tabs according to the customer design and trim away excess plastic to ensure
a snug fit in the drawer.
3. Add the dividers to the bin liner. The dividers should snap into the bottom of the drawer and
the sides of each bin liner quadrant.
4. Use the gray circular labels provided with the kit to cover any un-used divider slots in the bin
liner.
Note:
Dividers must be placed into the drawer in a specific order with each divider in a specific slot, so
separating the dividers by part number is recommended.
Note:
It is recommended that a drawing be made of each drawer, showing the customer’s preferred
configuration for each quadrant of a given drawer.