67
SPECTANO Analyzer Suite
10.9.2 Anti-Alias settings
In computer graphics, anti-aliasing is a graphic filter which improves the appearance of polygon edges,
so they are not "jagged" but are smoothed out on the screen. With these settings, the chart view can be
improved by smoothing the chart lines, markers, grid lines and text.
The level of anti-aliasing determines how smooth polygon edges are (and how much video memory it
consumes).
Anti-Alias level
is the overall scene anti-aliasing factor. Availability depends on the hardware. Higher
values give better appearance but cost of performance. Set 0 or 1 to maximize the performance.
Note:
Changing the Anti-Alias settings can incur a performance cost for the graphic card and
requires more video memory.
10.10 Load from the device
10.10.1 Automatic load from the device
The current measurement of the test file gets an ID while saving during measurement. This ID is
identical with the ID of the measurement saved on the device which is online.
The results are loaded automatically from the device to the corresponding measurement in the test file as
far as the measurement ID of the test or the backup file is the same as the measurement ID saved on the
device. Otherwise the results can be loaded manually.
Note:
Only the results but not the settings are loaded from the device.
10.10.2 Manual load from device
The results can be manually loaded from the device to a selected measurement in the test file by using
the
Load from device
command on the Test view ribbon.
Note:
Because only the results and not the settings are loaded from the device, ensure that the settings
in the test file are the same as those used for the measurement results saved on the device.
