37
SPECTANO Analyzer Suite
10.2 Create a new test
When creating a new test,
SPECTANO Analyzer Suite
guides you through the test workflow. This
section describes the test workflow step by step.
To create a new test:
1. Start
SPECTANO Analyzer Suite
.
2. In the start view, click the
New test
button
. The test view opens with the
File
tab selected on
the ribbon. On the left of the test view, the Navigation pane displays steps of the test workflow.
Figure 10-2
Test view:
File
tab
3. Under
General test settings
, enter the settings (see Table 10-9 "General test settings").
4. In the Navigation pane, click
Test cell settings
.
Under
Test cell configuration
, select the test cell type, and then enter the test cell settings
(see Table 10-10 "Test cell settings").
5. In the Navigation pane, click
Sweep settings
, and then enter the settings (see Table 10-11
Note:
The sweep settings depend on the measurement mode selected under
Measurement mode
.
