OMG MF 64, Инструкция по эксплуатации

Страница: 173 / 180

MF 64
Author: Donato Gavino Murru donato.gavino.murru@omgitaly.com Pag. 172 a 179
Automatic Cycle
Stop the rotation of the device by switch “Off” the electrical selector. For using this device in
automatic cycle , put the boundary margin of the scrap material in one wrapping bar. This
automatically wrapping the material when the motor is started.
When the wrapping scrap roll it’s too big cut the material with scissors , and extract by using the
pneumatic selector
Pay attention to stop the device before introduce the scarp on the bar.
Anyway where is a friction that for security reason can avoid to make
big injury when the motor turn. Not doing so may result in injury for body
parts.
Pay attention to stopping in front the device when a pneumatic exaction
is made. Not doing so may result in injury.
Selector to run the device
Put here the first stretch of
scrap