OMG MF 64, Инструкция по эксплуатации

Страница: 164 / 180

MF 64
Author: Donato Gavino Murru donato.gavino.murru@omgitaly.com Pag. 163 a 179
Stacker mode: type G
This mode is referring to downward stacking, in which the pieces are stacked using conveyor and
upperand lower stacker.
On the upper stacker is mounted the pusher, on the lower stacker is mounted the web tool locking.
(All tooling's provided by customer). Any kind of mold produces a different number of shapes, for
which it is necessary to change the tools.
The toolings that are mounted on the upper and lower stacker are used to keep the external scrap
web clamp tight while the upper stacker pushes the product on the conveyor.
The products accumulated on conveyor are pushed out when counter finish.
The amount of additional travelling setting is located in the lower stacker page on the touch screen.
Pay attention to adjust the working positions of flat bars properly. Not
doing so may result in injuries or mechanical damage.
When the stacking counter movement is completed, it is indispensable to extract the piles from the
blades. For this purpose, there is a pneumatic system that pushes the piles out of the stacker, and
pushes them on a table or conveyor located at the exit of the machine.
Lower Stacker
(Conveyor)
Open position
Stacking
position
Film
Extraction position with the counter
“on” up the additional level.
Upper Stacker tool
Conveyor
Taking out
the piles to
Conveyor
.