SECTION 7
LEARNING TO RIDE YOUR OMEO EVOLUTION
52
|
OMEO EVOLUTION USER MANUAL
Learning to Ride (cont.)
3. Turning on and riding your Omeo
Turning on the Omeo is a two-stage process:
1. The first stage is to switch on the Omeo by
using the InfoKey™ Controller by pressing the
Power button, to engage Standby Mode
2. The second stage is to push the Main Control
Switch on the Control Panel which raises
the Stabilising Legs and puts the Omeo into
Balance Mode.
You are now on a live platform ready to ride.
When learning to ride, have your Spotter stand at
the rear quarter of the device ready to hold the
Seat Back to stabilise it. This is the ‘Ready to Help’
position.
NOTICE
Always complete a pre-ride check for centre of
balance / control, environment, obstructions,
Battery charge, Tyre pressure and dress before
turning your Omeo on.
Turtle Mode
NOTICE
Your Omeo arrives pre-set in Turtle Mode to
10 kph / 6 mph.
This is so that you begin to ride your Omeo with
caution, before progressing to Standard Mode as
your skill level develops.
To unlock this setting for the first time, you
must press the Turtle Button on the Infokey™
Controller and the Information Display Button for
10 seconds.
Once unlocked you can simply revert to or from
Turtle Mode by pressing the Turtle Button once.
When in Turtle Mode your Omeo is more stable
and less aggressive when moving.
Before learning to ride your Omeo, you must
make sure that you are familiar with the InfoKey™
Controller codes and operation, and all other
operational procedures and warnings.
