Omega TF280-N, Руководство пользователя

Страница: 5 / 11

5
2. Wiring
Power supply is DC. Output is PNP / NPN. Please see Figure 1.
DIN & Cable Wiring:
PNP Output:

High(Max.) Mode: No. 1 pin(Brown) is connected to N-. No.3
pin(Blue) is connected to L+. Output is connected to No. 2
pin(Black), then connected to N-. No. 4 pin(Yellow Green) goes to
ground.

Low(Min.)Mode: number 1 pin(Brown) is connected to N-.
No.2 pin(Black) is connected to L+.

Output is connected to No. 3 pin(Blue), then connected to N-.
No.4 pin(Yellow Green) goes to ground.
NPN Output:

High(Max.) Mode: No. 1 pin(Brown) is connected to L+. No.3
pin(Blue) is connected to N-. Output is connected to No. 2
pin(Black), then connected to L+. No. 4 pin(Yellow Green) goes to
ground.

Low(Min.)Mode: No. 1 pin(Brown) is connected to N-. No.3 pin
(Blue) is connected to L+. Output is connected to No.2 pin
(Black), then connected to L+. No. 4 pin(Yellow Green) goes to
ground.