Omega TCL-3M165E2 Series, Руководство пользователя

Страница: 38 / 60

Operation Series TCL-3M165E2
- 38 -
5.6.4 Test specimen (DUT)
Here, you can link the desired test specimen with the test task.
Details of the selected test specimen are displayed in
the information box in the window.

Select the desired test specimen by tapping on
in the selection list.

Confirm your selection with the icon.

The new test specimen is adopted and you will
be returned to the previous window.
You can use the icon to switch into expert mode
for administering and configuring the test specimens.
Caution! Changes to existing test specimens always affect all the test tasks that are linked
to the test specimen (

§ 5.5).
5.6.5 Test points
The parameters of the test points are set here.
IMPORTANT! Dynamic designation and depiction of the parameter fields.
Depending on the selection of the "Behavior at test end" (

p. 40), individual parameter
fields have another designation or are suppressed.
The information box has several parameter fields for
setting the test points.
All the test points are displayed in the selection list.
The test points can be moved, copied, created,
deleted or changed from the toolbar.
Move test point:

Select the desired test point by tapping on in the selection list.

Move the test point down or up by tapping the / icons.
Copy test point:

Tap on the icon to copy the selected test point.

The test point is copied and appended at the end of the selection list.
Create new test point:

Tap on the icon to create a new test point.

The window for the test point setting is opened.

Input the temperature, the dwell time and the gradient and confirm the relevant input.

The input values are adopted and you will be returned to the previous window.
Delete test point:

On tapping the icon, the selected test task is immediately deleted.