Omega SP-016, Руководство пользователя

Страница: 21 / 28

21 | P a g e
5.2.6 IPSO Thermocouple Temperature Sensor Definition
The Thermocouple sensor IPSO definition provides signal range, measured min/max values, IPSO object type
information. The Range information is Thermocouple Type dependent.
Offset Name Value Description
0x00 Sensor Type 3303 Temperature (oC)
0x02 Precision 1 Provides reading of xxx.x
0x04 Reset Min/Max ?? Write any value to force a reset of min/max
0x08 Min Measured ?? Minimum reading since the last reset
0x0c Max Measured ?? Maximum reading since the last reset
0x10 Min Range
??
Type Min Range Max Range
J -210 1200
K -160 1272
T -190 400
E -220 1000
N -100 1300
R 40 1788
S 100 1768
B 640 1820
C 0 2320
0x14 Max Range
5.2.6.1 Sensor Trigger Function
The Sensor Trigger function is used to reset the IPSO min/max values as well as control the ICE Point / Single-Point Calibration
process .
Sensor Trigger Function
7 6 5 4 3 2 1 0
0 0 0 0 0 0 0
Reset
Min/Max
15 14 13 12 11 10 9 8
0 0
Calibration
Reset
Calibration
Status
Calibration
Mode
0
Capture
Low
Calibration
Start
The Calibration mode is entered by writing a 1 to the Calibration Mode bit. While in the calibration mode the
calibration registers may be accessed, the Capture may be used to capture the real-time value and the Calibration
Start may be set.
When the Calibration Start bit is set the Calibration Status bit will remain set until the calibration process is
complete. Setting the Calibration Reset bit will clear the calculated Offset values.