19 |
M 5 7 7 9
6
Appendix: SP-006 Registers
The following Appendix provides the registers and list index for the Layer N SP-006 Pressure monitoring Smart Probe. This
information is intended to aid users who will be making configurations and adjustments to their Layer N SP-006 Pressure
monitoring Smart Probe through the Command Line Interface or other custom interfaces.
6.1
Register Base Addresses
Smart Probe devices share a common platform architecture that provides extensive monitoring and control
capabilities through a set of platform generic registers. These registers may be accessed using I2C based commands
directly to the Smart Probe devices or through a set of Modbus-based registers when using Omega Interface devices.
Refer to the
Smart Sensor Device Interface
manual for further information.
When powered on, or after a device reset, each Smart Sensor-based device will enumerate 1 or more sensor
instances which are described by the device-specific Sensor Descriptors which include configuration options,
measurement type, and units of measure for the corresponding sensor values. Additional sensor information is
provided in sensor-specific IPSO object descriptions which include extended measurement type, precision, and
tracking of minimum/maximum readings.
Sensors are always enumerated in the order Pressure, Temperature (T), and DIO.
Each enumerated Sensor has a Descriptor Base address location and a Sensor IPSO / Configuration structure address
location based on the sensor mix selected.
6.2
Pressure Sensor
Sensor Descriptor Base IPSO/Configuration
Enumerated Sensor Mix
SP-006-0
SP-006-1
0
0x0060 (0xf030)
0x08a8 (0xf454)
Pressure
1
0x0068 (0xf034)
0x09a8 (0xf4d4)
Temperature Temperature
2
0x0070 (0xf038)
0x0aa8 (0xf554)
DIO
3
0x0078 (0xf03c)
0x0ba8 (0xf5d4)
6.2.1
Pressure Descriptor
The SP-006 configures the sensors based on the factory device list and user-specified list index. The Sensor
Configuration and Sensor Device fields may be written to provide control of the overall function of the channel
and the signal types used.
Offset
Name
Value
Description
0x00
Sensor Type
0x28
Pressure
0x01
Data Type/Format
0x06
Float type
0x02
Configuration Byte
??
See subsections below
0x03
Device Byte
0x00
Not Used
0x04..0x08
UOMR
“kPa”
Units of measure
6.2.1.1
Pressure Sensor Type
Sensor Type
SI Derived
Units
Measurement
0x28
kPa
Pressure
