Omega ORC97G, Инструкция по эксплуатации

Страница: 9 / 11

9
Troubleshooting
Fault Cause Solution
Light on, but motor does
not work
The fan is blocked Contact service
The capacitor is damaged Contact service
The motor jammed and bearing
damaged
Contact service
A smell coming from the motor Contact service
Light does not work;
motor does not work
Besides the above mentioned, check the following:
Light damaged Replace lights
Power cord loose Contact service
Shake of the body
The fan is damaged and causes
shaking
Contact service
The motor is not tightly mounted Contact service
The body is not tightly hung on
wall
Contact service
Insufficient suction
The distance between the body
and the gas top too long
Readjust the distance
Too much ventilation or breeze
from open doors or windows
Choose a better location and
re-assemble the machine
The machine inclines
The fixing screw not tight enough
Tighten the hanging screw
and make it horizontal
The hanging screw not tight
enough
Tighten the hanging screw
and make it horizontal