6
MAINTENANCE
Cleaning the grease filter mesh
The filter mesh is made of high-density stainless steel. Please do not use corrosive detergent on it. Keeping this
filter clean will keep the appliance running correctly. Please strictly follow the guidelines below.
Method 1
: Place the mesh in 40 –
50°C
clean water, add in a small amount of detergent, and soak for 2 - 3
minutes. Wear gloves, and clean with a soft brush. Do not apply too much pressure, as the mesh is delicate and
will damage easily.
Method 2
: The grease filters can be put into a dishwasher. To do so, set the temperature at around 60
°C
.
1.
To protect the main body from corrosion over a long period of time, the cooker hood should be cleaned
with hot water plus non-corrosive detergent every two months.
2.
Please do not use abrasive detergent for it will damage the body.
3.
Keep the motor and other spare parts free from water, as this will cause damage to the appliance.
4.
Before cleaning the appliance please remember to turn off power
5.
If fitted with active charcoal filters, the charcoal filter should not be exposed to heat.
6.
Please do not tear open the fixed bar around the active charcoal filter.
7.
If the supply cord is damaged, it must be replaced by the manufacturer or its service agent or a similarly
qualified person in order to avoid a hazard.
REPLACING THE LIGHTS
Warning:
Before attempting to replace the lights, ensure that the appliance is
switched off and unplugged from the wall socket.
•
Remove the grease filter.
•
Press the spring on either side of the lamp until it drops out (Pic. 1).
•
Gently pull out the connecting wire. Disconnect the terminals (Pic. 2).
•
Replace the bulb with an identical one:
o
LED modules – round lamp.
o
Max Wattage: 2 x 1.5W
o
Voltage Range: 12V DC
o
ILCOS D Code: DSR-1.5/65-S-64
•
Replace the grease filter.
Содержание ORC64XBA
Страница 1: ...INSTRUCTION MANUAL FOR OMEGA RANGEHOOD ORC64XBA...
Страница 2: ......