Omega ORC64XBA, Инструкция по эксплуатации, Страница: 6 / 11

3
INSTALLATION
The cooker hood should be placed at a distance of 65-75cm from the
cooking surface for the best effect. See Pic 1.
Install the hook in a suitable place once the installation height is fixed,
and keep it vertically aligned. The fixed position of the inside chimney
bracket determines the location of the chimney.
Fix the outside chimney bracket on the outside chimney, and be sure that
the inside chimney can be adjusted in height freely, as well as being able
to fix the exhaust pipe (Not included in the rangehood). Afterwards, install
the exhaust pipe and chimney on the cooker hood. See Pic 3.
Lift the cooker hood onto the hook. See Pic 4.
Adjust the height of the inside chimney to the position of the inside
chimney bracket, and fix by screw. After adjusting the position, fix the
body with safety screws. See Pic 5.
Note : The two safety screw holes are positioned on the back casing, with diameter of 6m.
Warning : Failure to install the screws or fixing device in accordance with these instructions may result in electrical
hazards.