Omega OF910FXCOM, Инструкция по эксплуатации

Страница: 22 / 26

19
Maintenance and Cleaning
WARNING : Disconnect the appliance from the electrical supply before performing any maintenance or
cleaning.
1. While the oven is operating or shortly after it starts operating, it is extremely hot. Avoid touching the
heating elements.
2. Do not use harsh cleaners such as hard wire brushes, abrasive cleaners or detergents.
3. Use a soft, damp, soapy cloth to clean the interior of the oven. Dry with a soft towel.
4. Clean the glass surfaces with special glass cleaning agents.
5. Do not use steam cleaners to clean your oven.
6. Clean spilled liquid from the top cover of the oven before removing.
7. Never use inflammable agents like acid, thinner or gasoline when cleaning your oven.
8. Do not wash any part of your oven in the dishwasher.
9. In order to clean the front glass of the oven; remove the fixing screws fixing the handle with a screwdriver
and remove the oven door. Clean and rinse it thoroughly. After drying, place the oven glass properly and
re-install the handle. Take care to not scratch the glass as scratches can cause it to shatter during
operation.
Figure 15 Figure 16 Figure 17
Installation of Oven Door
Figure 18 Figure 19
Figure 18.1
Completely open the
oven door by pulling it
towards yourself.
Unlock the hinge by
pulling the lock
upwards with the help
of a screw driver as
shown in figure 18.1.
Figure 18.2
Bring the hinge lock to
the widest angle as
shown in figure 18.2.
Bring both hinges
connecting the oven
door to the oven to the
same position.
Figure 19.1
Afterwards, close the
oven door as to lean
on the hinge lock as
shown in figure 19.1.
Figure 19.2
To remove the oven
door, pull it upwards
by holding it with both
hands when close to
the closed position as
shown in figure 19.2.
In order to re-place the oven door, perform the abovementioned steps in reverse.