12
Operating Instructions
Controls
1. Digital timer
2. Thermostat
3. Function selection button
4. Front left heater
5. Rear left heater
6. Far left heater (Wok burner or hotplate)
7. Rear right heater
8. Front right heater
Note
: The control panel above is only for illustration purposes. Consider the control panel on your device.
Oven Thermostat Control
: The oven thermostat control is used to select
the desired temperature for cooking. When the temperature inside your
oven reaches the value set, the thermostat will cut the circuit and the
thermostat light will go off. When the temperature falls below the set
value, the thermostat will again be turned on alongside the thermostat
light. It is normal for this to occur during the cooking process, particularly
when the door has been opened.
Using Oven Heating Elements
1.
When operating the oven for the first time, you may notice an odour coming from the oven. This
is normal and it is recommended to operate the oven at 250°C for 45-60 minutes while it is
empty before cooking any food.
2.
Set the temperature dial to the required temperature in order to operate the oven.
3.
Whilst the oven is operation, try to open the oven door as little as possible as this lets the heat
out and reduces the cooking efficiency.
Содержание OF910FXCOM
Страница 1: ...Instruction Manual Free Standing Oven OF910FX OF910FXCOM OF995FXCOM ...
Страница 26: ...1 IM v4 0 ...