Omega OCC64TZW, Инструкция по эксплуатации

Страница: 9 / 17

6
OPERATING INSTRUCTIONS
The basic layout of the cooktop is as shown.
A) 1200W (at 230V) cooking zone (Ø145mm)
B) 1800W (at 230V) cooking zone (Ø180mm)
C) 1800W (at 230V) cooking zone (Ø180mm)
D) 1200W (at 230V) cooking zone (Ø145mm)
The cooktop appliance is operated by touching buttons, with the functions confirmed by LED displays and
acoustic signals.
1-Heater display
2-Activate/Deactivate heater
3-Heat setting decrease
4-Heat setting increase
5-Decimal point
6-Key lock indicator
7-Key lock
8-On/Off
Turning On and Turning Off the Cooktop Appliance
If the appliance is in Stand-By-Mode (power connected, but not on), it can be put into Operating-Mode by
pressing the
Power On/Off
touch control for at least 1 second. A beep signal indicates the successful
operation.
A “0” will appear on all heater displays and all decimal points corresponding to heaters will start flashing.
If there is no operation within 10 seconds, the LED will turn off and the appliance will return to the
Stand-
By-Mode
.
If the
Power On/Off
touch control is pressed more than 2 seconds (in
Operating-Mode
), the appliance will
switch off and will enter
Stand-By-Mode
. The appliance can be switched off by pressing
On/Off
touch
control at any time, even if other buttons are pressed simultaneously.
If there is any residual heat from a heater, this will be indicated in the corresponding heater display.
Selecting A Cooking Zone/Heater
If a single heater is chosen with the corresponding
Activate/Deactivate
Heater Button, the decimal point of
the heater display will flash. For the selected heater, you can set the heat level between 1 and 9 by
pressing the Heat Setting Buttons “+” or “-”.