Omega OCC64TCOM, Инструкция по эксплуатации

Страница: 7 / 16

4
INSTALLATION
Cut out the work surface according to the sizes shown in the image below.
Ensure that there is a minimum of 50mm of space around the cutout.
The thickness of the bench should be at least 30mm. Please select heat-resistant and insulated
bench materials
(Wood and similar fibrous or hygroscopic materials should not be used as the bench material unless impregnated)
to avoid the electrical shock and larger deformation caused by heat radiation from the hotplate.
Note : The safety distance between the sides of the hob and the inner surfaces of the worktop should be at least
3mm.
L(mm) W(mm) H(mm) D(mm) A(mm) B(mm) X(mm) F(mm)
590 520 55 51
560+4
+1
490+4
+1
50 min. 3 min.
Important: Ensure that the cooktop is well ventilated and that the air inlet and outlet are not blocked.
Note
: The safety distance between the hotplate and the cupboard above the hotplate should be at least 760mm.
A(mm) B(mm) C(mm) D E
760 50 min. 20 min. Air inlet Air outlet (5mm)