Omega OBO960XTGG, Инструкция по эксплуатации

Страница: 5 / 17

5
Appliance Details
Electrical Details
Models
OBO960XTGG
OBO960X
Voltage Rating 220-240V ~50Hz
Power Rating 3600W
Supply Connection Hardwired to power supply
Dimensions
LENGTH (mm) DEPTH (mm) HEIGHT (mm) CAVITY (L)
898 570 595 129
Electrical Connections
LOCAL AUTHORITY REQUIREMENTS
Installation is only permitted by a licensed electrician, and carried out according to instructions
provided by the manufacturer. Incorrect installation might cause harm and damage which the
manufacturer accepts no responsibility.
ELECTRICAL INSTALLATION FOR THE LICENSED ELECTRICIAN
This oven must be connected to a 220-240V 50Hz power supply.
Before carrying out the connection to the power supply, the voltage rating of the appliance (stamped on the
appliance identification plate) must be checked for correspondence to the available mains supply voltage,
and the mains electric wiring should be suitable for the oven’s power rating (also indicated on the appliance
identification plate);
The switched outlet must be connected to a suitable earth wiring, in conformity to current safety regulations.
A circuit breaker with a contact opening of at least 3mm MUST be installed inside the supply circuit. It
should not be located above the appliance and no more than 1.25m away from it. The power supply cord
must not touch any hot surfaces and must be placed so that its temperature does not exceed 75°C at any
point along its length. After having installed the appliance, the switched outlet must always be in an
accessible position.
NOTE : For connections to the mains power supply, never use adapters, reductions or multiple power points
as these may overheat and catch fire.
The mains terminal block is located on the back of the oven and the terminals are accessible by opening
the terminal block cover.
Note : The terminal cover should not be opened when the mains power is still connected to the appliance
and never by an unauthorized person.
The electrical safety of this appliance can only be guaranteed if the oven is correctly and efficiently earthed.
The manufacturer declines all responsibility for damage resulting from an installation which has not been
earthed correctly. The use of adapters, multiple sockets and/or extensions, is not allowed.