Omega OBO691TGG, Инструкция по эксплуатации

Страница: 6 / 19

3
Installation Instructions
The adjacent furniture must be able to withstand a minimum temperature rise of 100°C above
the ambient temperature of the room it is located in, during periods of use. The power supply to
the appliance must be cut off before any adjustments or maintenance work is done on it.
PREPARATION FOR INSTALLATION AND USE
Manufactured with best quality parts and materials, this modern, functional and practical oven will meet
your needs in all respects. Make sure to read the manual to obtain successful results so as not to
experience any problems in the future. The information given below contains rules that are necessary for
correct positioning and service operations. They should be read without fail, especially by the technician
who will position the appliance.
CHOOSING A PLACE FOR THE APPLIANCES
There are several points to pay attention to when choosing a place for your oven. Make sure to take into
account our recommendations below in order to prevent any problems and dangerous situations, which
might occur later!
When choosing a place for the oven, attention should be paid that there are no flammable or combustible
materials in the close vicinity, such as curtains, oil, cloth etc. which quickly catch fire.
Furniture surrounding the oven or cooktop must be made of materials resistant to temperatures above 100
C°. Required changes to wall cabinets and exhaust fans above a built-in cooktop as well as minimum
heights from the oven board are shown in Figure 1. Accordingly, the exhaust fan should be at a minimum
height of 65 cm from the cooktop. If there is no exhaust fan the height should not be less than 70 cm.