Omega LTUM1 Series, Руководство пользователя, Страница: 5 / 11

5
2. Wiring
Power supply is DC. Output is PNP / NPN. Please see Figure 1.
PNP wiring:

High (Max.) Mode: No. 1 pin (Brown) is connected to L-. No.3 pin (Blue) is
connected to L+. Output is connected to No. 2 pin (Black) , then connected
to L-. No. 4 pin (Yellow Green) goes to ground.

Low (Min.) Mode: number 1 pin (Brown) is connected to L-. No.2 pin
(Black) is connected to L+.

Output is connected to No. 3 pin (Blue), then connected to L-. No. 4 pin
(Yellow Green) goes to ground.
PNP wiring:

High (Max.) Mode: No. 1 pin (Brown) is connected to L+. No.3 pin (Blue) is
connected to L-. Output is connected to No. 2 pin (Black) , then connected
to L+. No. 4 pin (Yellow Green) goes to ground.

Low (Min.) Mode: No. 1 pin (Brown) is connected to L+. No.2 pin (Black) is
connected to L-. Output is connected to No. 3 pin (Blue) , then connected to
L+. No. 4 pin (Yellow Green) goes to ground.