![background image](http://html1.mh-extra.com/html/omega/dp400tp/dp400tp_user-manual_737784043.webp)
User manual - DP400S -
43
13.4
Dynisco MELT
This parameter allows to quickly set the device for operation with a selection of
Dynisco melt pressure sensors.
52 Easy-up
Select one of the listed Dynisco melt pressure sensors to automatically
configure the parameters suitable for that sensor
---------------- (
Default
)
ECHO-MV3-PSI-R20 ECHO-MV3-PSI-R23
ECHO-MV3-PSI-R21 PT462E-15M-6/18
ECHO-MV3-PSI-R22
In particular, these selections should be set to the following parameters:
Sensor type
Contact type alarm 1
mV / V sensor
Alarm threshold 1
Decimal point
Hysteresis alarm 1
Measure unit
Lower limit alarm 1
Full-scale
Upper limit alarm 1
Lower limit
Alarm type 2 (calibration)
Upper limit
Graphic lower limit
Alarm type 1 (absolute)
Graphic upper limit
13.5 Alarm 1
Parameters to configure Alarm 1
54 Alarm type
Alarm 1 selection
Disabled (
Default
)
Remote control
Absolute alarm
Gross weight
Band alarm
Net weight
Digital input 1
Stable weight
Digital input 2
Sum
Sensor failure
Содержание DP400TP
Страница 53: ...User manual DP400S 53 ...
Страница 54: ...54 DP400S User manual ...
Страница 55: ...User manual DP400S 55 ...