![background image](http://html1.mh-extra.com/html/omega/dp400tp/dp400tp_user-manual_737784036.webp)
36 -
DP400S - User manual
11 Totalizer
Visualize on corresponding page the total value of measured process
considering the sensor signal as unit/time value (ex. if full-scale of the
connected sensor is 2000m3/hour, parameter 11
Totalizer
has to be
selected as
Hour
and display will visualize the total fluid volume from the
last RESET/START signal till present).
Disabled
Display visualizes process value (
Default
)
Second
Display visualizes rate in unit/s
Minute
Display visualizes rate in unit/min
Hour
Display visualizes rate in unit/hour
12 Sum function
Enable the sum function and its dedicated page. Allow to sum the process
value to a variable.
Disabled (
Default
)
Enabled
13 Store
Enable to store in EEPROM the values of peaks, totalizer, sum function and
zero tare. If disabled, at starting the above-mentioned values start from 0.
The storing is done automatically every 5 minutes.
Disabled (
Default
)
Enabled
14 Conversion filter
ADC Filter: defines the type of digital filter applied to the reading of the
analog input.
Filter 4th ord.
No filter
Average 2 samp.
...
Average 20 samp.
When average increase, control loop speed slows down.
Default
: Average 10 samp.
Содержание DP400TP
Страница 53: ...User manual DP400S 53 ...
Страница 54: ...54 DP400S User manual ...
Страница 55: ...User manual DP400S 55 ...