/21
Specifi c Information for calibre 3220
OMEGA SA
WORLD SERVICE ORGANIZATION
GT-19-C-024-E - C - 3220
6.0 Setting the time
The instructions below must be followed to achieve
perfect synchronisation of hands:
1. Firstly, adjust the small second: pull the crown to
position 2; the small second at 3 o’clock stops. It is
advisable to stop the small second at 60 seconds.
2. Turn the crown forwards or backwards to set the
minute hand. For the minute and small second hand
to
synchronise perfectly, the minute hand must be 30 to
45 seconds ahead on the desired index (this
procedure is specific to the Cal. 3220). The train
energy is transmitted to the hands via three wheels.
When setting the time, the gearing end play must be
compensated for by advancing the minute hand by
30 to 45 seconds.
3. Push in the crown when the reference time matches the
set time of the watch.
1 2
6.1 Chronograph Operation
Start
Stop
Remise à zéro
(uniquement après arrêt)
Important:
Chrono hour and minute counters do not jump but instead mouve continnesly while the chrono is running.
Reset (only after stopping)
