Omega Altise OPAL, Инструкция по эксплуатации

Страница: 5 / 7

omega altise
5
Operating Instructions
Remove the air purifier form its packaging.
Ensure that the system of supplied filters is properly in place.
Plug the power cord correctly into an electrical outlet.
Press the power button to turn the air purifier on. Press the same button again
to turn the air purifier off.
Press the fan button to select the fan speed:
L (low)
Æ
M (medium)
Æ
H (high)
Press the ion button to turn on the ionizer function. Press the button again to
turn this function off.
Press the clock button to select the timer-off function:
1
Æ
2
Æ
4
Æ
8
The air purifier will automatically turn off when it runs for the selected hours.
The HEPA filter indicator will light up when the HEPA filter needs to be
replaced (approx 2000 hrs depending on the quality of air).
Hold the filter button for several second until the HEPA filter indicator shuts off.
This will reset the 2000 hours of use timer.
Filter System
This unit uses a HEPA and active carbon filter assembly to purify the air passing
through it.
•
Active carbon filter – removes odours, organic vapour and larger dust
particles and hair.
•
HEPA – removes airborne particles (down to 0.3 micron size) and
airborne allergens such as fine dust, dust mite debris or bacteria etc.
Typically the filter should be changed after every 2000 hours of use. However, this
may vary depending on the surrounding conditions of actual use.