OMEGA ALTISE ELITE
OPERATING THE DESK FAN:
A)
Press the Power On/Off button once to turn on the fan (default setting is high). Press again to turn the fan off.
B)
Press the Oscillation On/Off button once to start the fan oscillating left to right (indicator D3 will turn on). Press a
second time to stop the fan from oscillating.
C)
Press the Fan Speed Control button to adjust the fan speed. There are 3 fan speeds available (high, medium and low).
When turned on, the default setting is high (indicator D2 shows all 3 fan blades). Pressing once will decrease the speed
to medium (D2 will show 2 fan blades). Pressing again will reduce the speed to the low setting (D2 will show 1 fan
blade). Pressing once more will return the setting to high.
D)
Press the Turbo Fan Speed button to get an even higher air flow (indicator D2 will show all 3 blades and indicator D5
will show a rotating fan). Press again to reduce the fan speed back down to normal.
E)
The default setting for the timer is continuous (indicator D6 shows FU). To set up a timer (to turn the fan off after a
pre-set time), start the fan running and press the Timer On/Off button. Each press of the button will increase the time
by one hour (shown on the Timer display as 1-10). Pressing the button again after reaching 10 hours will return the
fan to continuous operation. To turn the timer off, either press the Power button (turning the fan off), or adjust the time
to FU. Adjustments to the settings can be made to all settings while the timer is on.
CLEANING & MAINTENANCE
WARNING:
ALWAYS UNPLUG THE CORD BEFORE MOVING OR SERVICING, DO NOT
IMMERSE APPLIANCE IN WATER!
The fan should be cleaned periodically (at least once a month depending on the build-up of dust).
Clean the body of the desk fan with a soft damp cloth. Always make sure that the appliance is completely dry before
connecting back to the mains supply.
CAUTION: Do not use gasoline, benzene, thinner, harsh cleaners, etc. as they will damage the fan. NEVER use
ALCOHOL OR SOLVENTS.
Do not disassemble the fan in any manner.
STORAGE: Store the desk fan with these instructions in the original packaging, in a cool, dry place.
To replace the remote control batteries, first remove the
rear cover. Remove the old batteries and replace with
new ones (take note of the + and – alignment). Slide the
cover back in place.
It is important that you retain these instructions, proof of purchase as well as other important
documents about this product for future reference. Due to continual product development,
Omega Altise reserves the right to alter specifications or appearances without notice.
Dispose of packaging responsibly – recycle where facilities are available.
A division of Shriro Australia Pty Ltd
104 Vanessa St Kingsgrove NSW 2208
In Australia: 1300 795 572
In New Zealand: (09) 415 6000
www.omegaaltise.com
IM Ref: OAELITEB 08/2014/07
