Omcan Santos 53, Инструкция по эксплуатации

Страница: 5 / 24

5
Safety and Warranty
5. The base must not be immersed in water.
6. Do not use the appliance if the power supply cord is damaged. It must be replaced by either a Omcan
approved dealer or a person with similar qualifications to avoid any danger.
7. The appliance must be unplugged before any intervention on it: cleaning, general care, maintenance.
8. It is forbidden to operate the appliance on a surface with a slope in excess of 10° with respect to the
horizontal plane. The feet of the machine must always be resting on this surface.
9. The use of spare parts other than certified original parts is prohibited.
10. Never connect several appliances to the same power socket.
11. Never use the machine outdoors.
12. Never place the appliance close to or on a source of heat.
13. This appliance is a professional machine designed exclusively for professional use. It is not designed for
household use.
Note: You will find it easier to understand the next few paragraphs if you refer to the diagrams at the
end of this manual.
14. This appliance is not designed for use by people (including children) whose physical, sensorial or mental
capacities are impaired or by people with no experience or knowledge, unless they have been supervised
or given training in the use of the appliance beforehand by a person responsible for their safety. Supervise
children to ensure they do not play with the appliance.
INSTALLATION AND HANDLING
The machine can be handled by a single person. It is recommended that the appliance be placed on a table or
work top for more comfortable use with the controls facing you (recommended height: 90 cm, to be adapted as
required for the user).
ELECTRICAL CONNECTION
Line protection: the machine should be connected to a standard 2-pole + ground electric socket. The set-up
must be fitted with a differential circuit breaker and a 16A fuse. The appliance must be grounded (fig. B).
CARE
• Before connecting the machine, check that the main electrical voltage is the same as the voltage for your
appliance.
• If the power cable (10) is damaged, it should be replaced by a Omcan approved dealer, Omcan or a person
with similar qualifications to avoid any danger.
USING FOR THE 1ST TIME
Carefully clean the parts of the machine in contact with the ice cubes (fig. A).
• Grip the handle of the cover (2) to unlock it, then lift it up to gain access to the ice cube hopper (3). Clean
the cover (1), hopper (3), ice bucket (6) with a non-abrasive sponge and standard washing up liquid.