7
Maintenance
Operation
•
Before beginning with any cleaning or repairs make sure the device has been disconnected from the power
socket and has cooled down completely.
•
Don’t use any acidic agents and make sure no water enters the device.
•
To protected yourself from electric shock, never immerse the device, its cables or the plug in water or other
liquids.
•
Don’t use any kind of pressure water jet for cleaning the device.
CLEANING
•
The device should be cleaned regularly.
•
Clean the device with a soft, damp cloth and a mild cleaning agent.
•
Clean the shelves and the housing with a soft, damp cloth and a mild cleaning agent.
• Clean the water bowl regularly. Calcifications in the water bowl can be removed with common agents or
liquids.
•
Only use a soft cloth and make sure you never use any kind of abrasive agents or pads which could
scratch the surface.
•
After you have completed the cleaning procedure, you should use a soft and dry cloth to wipe dry and
polish the surface.
•
Make sure the device has been cleaned properly before storing it.
MAINTENANCE
•
Check the plug from time to time to ensure it is not damaged in any way. Never use the device if the plug or
cables are damaged. If damaged, they must be replaced by a qualified electrician.
• Only a qualified technician should carry out repairs and maintenance of the device. Do not attempt to repair
the device by yourself.
• Before first use, clean the inner sides and the shelves with a soft cloth and a mild cleaning agent.
Afterwards, dry the device thoroughly.
• Remove the water bowl from the device, fill the water bowl with water and reattach the water bowl to the
device.
•
Connect the device to a single grounded power supply.
• Set the temperature as required for respective foods. You may adjust the desired temperature in the range
between 30°C - 90°C.
•
The temperature inside of the hot display can be read from the front display.
•
Put the foods in appropriate containers before placing them inside the hot display and shut it by using the
sliding door.
•
Some of the device parts become very hot, always use safety gloves when placing or removing foods.
• Switch on the inner light when required using the light switch of the device.
•
Disconnect the device from the power socket when the device is not in use.