Omcan CE-CN-0288, Инструкция по эксплуатации

Страница: 8 / 12

8
Troubleshooting
Problem Possible Cause Solution
After connecting the power and
pressing the “power” key, the
appliance has no response.
Is the electricity in suspension? Use after resuming the electricity.
Is the fuse broken down? Check the root causes carefully.
If the problem cannot be fixed,
please contact Omcan for checking
and repairing.
Is the plug connected firmly?
Heating being interrupted in normal
use and a “Beep” will be heard.
Incompatible cookware or no
cookware is used?
Replace compatible cookware for
the induction cooker.
Is the cookware not considerably
placed form the center of the
heating zone?
Place the cookware at the center
of the defined heating zone.
Is the cookware being heated but
continually being removed?
Place a cookware inside the
heating zone.
No operation during the heating
being in use.
Is the cookware empty or the
temperature too high?
Please check whether the
appliance is being misused.
Is the air intake/exhaust vent
clogged or dirt has accumulated?
Remove the stuff clogging the
air intake/exhaust vent. Operate
the appliance again after cooling
down.
Is the cooker working over 2 hours
without any external instruction?
Reset cooking modes or use timer
function.
Error codes occur. E0 Internal circuit error. Please contact Omcan for
checking and repairing.
E1 Without cookware or
Incompatible cookware used.
Please check whether the
cookware is not suitable, or switch
on the appliance again after it is
cooled down naturally.
E2 Internal overheat.
E3 Over-voltage. Please contact Service Centre for
checking and repairing.
E4 Under-Voltage.
E5 Top plate sensor open/short
circuit.
E6 IGBT sensor open circuit/short
circuit.
REFERENCE
Item Number Model Number Description
Manufacturer Model
Number
45486 CE-CN-0288 Induction Cooker Home 120V/60/1 cETLus JDL-C18D34