10
IMPORTANT:
The top wheel can be easily taken off to the motor shaft. Avoid scraping inside the wheel hole,
otherwise, the efficient working of the bandsaw may be undermined
(Figure 33)
.
7. Remove the spring and, with two hands, pull off the drive pulley
(Figure 34)
.
IMPORTANT:
When the bottom pulley doesn’t pull off easily, use the bottom wheel extractor supplied.
8. Remove the bottom and top blade guide group
(Figure 35)
.
9. Wash the parts removed with running water.
10. Clean the residuals of product with a small brush with soft bristles and a cloth.
11. Wash the structure with running water and a sponge (avoid using water under pressure)
(Figure 36).
12.
The plate must be frequently sterilized in an industrial washing machine
(Figure 37)
.
13. Reassemble the wheels following the reverse procedure. Making sure that the top wheel is perfectly central
on the shaft and the retaining spring is correctly placed
(Figure 38)
.
14. Follow the instructions on the “Components Assembly” under Installation section to mount the other
components.
LUBRICATION
After each washing, grease the rollers with some drops of oil type SHELL ONDINA 15 or ESSO MARCOL 82
or similar oil marking sure that they rotate while they are being lubricated.
MAINTENANCE
When the cut is jagged or the blade begins to slide producing a sloping cut or when the operator must increase
the pressure to keep it in line, it means that the blade is worn. It must be replaced following the instructions in
the “Saw Blade Removal” under Installation section.
REMOVAL AND DISPOSAL
The symbol affixed on the machine means that it must not be disposed with usual urban waste. The European
2002/96/EC Directive classifies the machine as WEEE, which disposal must be effected according to law.
Maintenance
PROBLEM
REMEDY
The single-phase motors stops during use.
Push the motor reset switch. Restart the machine
following the standard procedure.
The three-phase motors stops during use.
Wait for a few minutes (to allow the inside
temperature to fall). Restart the machine following the
standard procedure.
Troubleshooting
Содержание BS-IT-1651
