Omcan B34, Инструкция по эксплуатации

Страница: 6 / 24

6
Installation
Operation
Be sure to install the bandsaw in an easily accessible area with plenty of space.
Grounding wire must always be connected.
IMPORTANT: Check the tension of the blade by turning the handle clockwise before operating it.
BEFORE OPERATION
Check and make sure the machine is in a stable location. Wash with warm water and soap all the food-contact
parts, and wipe dry. To do it proceed as follows:
1. Switch the machine off and disconnect it from the power source.
2. Open the upper door and lower door by pulling the handle.
3. Loosen the blade turning the handle or calibrator (optional) clockwise and take it out from the upper and
lower wheels.
4. Take out the staples which are in front of the upper and lower wheels to be able to pull them out.
5. Assemble the components following the inverse steps.
IMPORTANT: The blade must be well calibrated. Use the handle turning it clockwise to get the right
tension of the blade. Keep the machine off to adjust the cutting regulator.
OPERATION
Switch on the machine pressing the on/off switch.
Put the product to be processed onto the table, pushing it to the direction of the blade lined up by the cutting
Technical Specifications
Model BS-VE-2489-E
Blade Length 98” / 2489mm
Cutting Capacity 12” x 10.5” / 305 x 267mm
HP 2 HP
Electrical 220V/60/1
Weight 346 lbs. / 156.9 kgs.
Dimensions 36” x 40” x 72” / 914 x 1016 x 1829mm
Item Number 10271