Omcan 46785, Инструкция по эксплуатации

Страница: 8 / 20

8
Maintenance
Clean with hot water and a stiff brush.
You can also use a hot damp towel to clean the main spare parts, blade and protective devices. Use a dry cloth
to wipe away all residual water.
Special attention should be made in ensuring that the dead angle, wheel, chain wheel and bottom parts are
also carefully cleaned.
Do not use water jets or sprays to clean the machine. Do not immerse any part of the machine in water. Doing
so will cause an electrical hazard.
MAINTENANCE
After every 200 working hours, it is advised to use some food safe machine lubricant on the guide apparatus of
the tightening device. After 5000 working hours, we suggest to replace the wheel bearings.