Omcan 46785, Инструкция по эксплуатации

Страница: 6 / 20

6
Technical Specifications
Installation
Model BS-CN-1651-T BS-CN-2020 BS-CN-2400
Electrical 110V / 60Hz / 1 220V / 60Hz / 1
Power 750W 1500W 2200W
Diameter of Wheel 8.3” / 211mm 9.8” / 250mm 11.8” / 300mm
Length of Saw 65” / 1651mm 79.5” / 2020mm 94.5” / 2400mm
Material of Saw High-Carbon Steel
Line Speed of Saw
Blade
16m/s 18.8m/s 22.6m/s
Dimensions of Working
Table
17.3” x 18.3”
440 x 465mm
22.2” x 26.3”
565 x 668mm
30.2” x 29.1”
767 x 738mm
Thickness of Table 0.1” / 3mm 0.2” / 4mm
Max Slicing Thickness 6.3” / 161mm 8” / 202mm 9.9” / 252mm
Max Height of Cutting 9.4” / 238mm 12” / 304mm 14” / 355mm
Speed of Motor 1400r/min
Weight 89.5 lbs. / 40.6 kgs. 265.4 lbs. / 120.4 kgs. 310.9 lbs. / 141 kgs.
Packaging Weight 126.1 lbs. / 57.2 kgs. 340.8 lbs. / 154.6 kgs. 409 lbs. / 185.5 kgs.
Packaging Dimensions
19.7” x 20.5” x 40.2”
550 x 520 x 1020mm
26.4” x 29.3” x 63”
670 x 745 x 1600mm
32.3” x 34.4” x 68.3”
820 x 875 x 1735mm
Item Number 46785 46786 46787
Place the machine in a stable and flat location. Especially when assembling or disassembling. If the surface
is not completely flat,you can adjust the rubber feet to compensate. Please ensure that the power supply is
the same as indicated on the rating label and is properly grounded. Please ensure that the power cable is
long enough to reach the power source comfortably and that the cable is not damaged. When the machine is
opened by the user, please inspect the saw belt length on the top and bottom block, it is must be parallel with
the edge of the block. Close the machine’s door and connect to the power source, turn on the green switch,
and then the machine is ready for operation. If you turn off the red switch, the machine will shut down.
PLEASE ENSURE THE BELOW AT ALL TIMES:
1. The machine should be running correctly (clockwise).
2. If the saw blade is loose, please turn the handle on the top until tightened. When properly tightened, the
machine will slice correctly and can now be operated safely.
NOTES:
1. During installation, please pay attention to direction of the blade, the blade must be facing the correct
direction.
2. The scraper must be installed properly with the saw blade. If it is improperly installed, it will cause more