27
400715D-EN
4.
Apply a light coat of Lubriplate to a new
O-ring
[1], then install it on the new
final filter assembly
. Make sure
the
O-ring
is between the ridges on the
seal
[2].
Figure 44
5.
Install the
final filter assembly
into the
inlet body
.
Figure 45
6.
Install the
nozzle body
.
Clean the Metal Screen Filter Assembly
Clean the metal screen filter screen every 40 hours or more often if needed. Replace the metal screen filter if it is
damaged.
Figure 46
NOTICE
To prevent damage, always use non-metal or softer metal tools (such as brass, copper, or aluminum) to
remove the metal screen filter assembly or a light blast of air. Scratches can cause leaks and low pressure
in the system. Replace damaged components.
Содержание MAXJET 5i 305617 Series
Страница 32: ...32 400715D EN...