Olympus STF-8, Инструкция по эксплуатации

Страница: 27 / 172

27
EN
Safety precautions
Read WARNINGS and CAUTIONS thoroughly to ensure safe usage. These
safety precautions protect the users and others and prevent property damage.
WARNING
Failure to observe the precautions indicated by this symbol may
result in injury or death.
• Do not use
fl
ash in places where it may be exposed to
fl
ammable or explosive gas.
Otherwise,
fi
re ignition or explosion may result.
• Do not directly solder the product or modify, remodel, or disassemble.
• Do not cover the light emitting area of the
fl
ash with your hand, and do not touch the
light emitting area after continuous
fi
ring. It may burn your skin.
• Water and foreign matter inside of the device may cause
fi
re or electric shock. If the
device is immersed in or exposed to water or foreign matter is found inside of the
device, turn off the power immediately and remove batteries with care. Contact your
dealer or consult an Olympus Authorized Service Station.
• To prevent a traf
fi
c accident, do not direct the
fl
ash at a person operating a motor
vehicle.
• Do not use the
fl
ash or AF illuminator in close proximity to others (especially infants).
Keep the
fl
ash out of reach of children. Light from the
fl
ash can cause visual
impairment.
• Do not use batteries that are not speci
fi
ed for use.
• Do not mix old and new batteries, or batteries made by different manufacturers.
• Do not connect substances such as metal to the (+) or (–) of batteries.
CAUTION
Failure to observe the precautions indicated by this symbol may
result in injury or property damage.
• If you notice any abnormalities such as odor, noise, or smoke, stop using this device.
Otherwise a
fi
re or burn may result. Remove the batteries carefully to avoid burning
yourself, and contact your dealer or consult an Olympus Authorized Service Station.
• Do not operate with wet hands. This may cause malfunction or electric shock.
• Do not use or leave the batteries in a place subject to high temperatures (such as in
direct sunlight, in a hot vehicle, or near the stove).
• Before attaching the macro
fl
ash to the camera, wipe the point of contact free of dirt
and moisture to prevent malfunction.