Olympus SteerROVER, Руководство пользователя

Страница: 41 / 266

10-004209-01EN [Q7750159], Rev. 2, May 2018
Preparation for Use 31
To prevent serious human injury and/or death, do NOT operate or place SteerROVER
on a surface higher than 2 m (6 ft) without a proper tether held taut at all times.
Hook the tether hook to the provided lifting sling BEFORE placing the SteerROVER
on the surface to be inspected (ex.: tank). IMPORTANT: The tether hook must have a
safety latch to prevent accidental disconnection that could result in serious human
injury or death.
When used at a height greater than 2 m (6 ft), the SteerROVER scanner MUST be
tethered with a proper tether system to prevent the scanner from falling. The tether
system must:
• Be capable of safely suspending the SteerROVER from above in case the scanner
detaches from the inspection surface;
• Have sufficient capacity to catch and hold a 70 kg (150 lb) load;
• Include a mechanism (that is, a self retracting inertia reel fall arrester) or person to
continuously take up slack in the tether as the SteerROVER moves;
• Include a lifting hook with a safety latch to prevent accidental disconnection. The
hook must be free of sharp edges that may cut or abrade the provided lifting
sling.
Before placing the scanner on the surface to be inspected (ex.: tank), attach the
provided lifting sling to the SteerROVER, and then hook the tether hook to the lifting
sling.
WARNING
WARNING