Olympus PT-EP08, Инструкция по эксплуатации

Страница: 38 / 172

EN 13
EN
Load the digital camera
1
Confirm that the digital camera is OFF.
2
Gently insert the digital camera into the Case.
3
Insert a silica gel bag (1g) between the bottom of the digital camera and the Case.
The silica gel bag provided for prevention of fogging.
Make sure the camera is loaded properly
Check the following points before sealing the Case.
• Is the digital camera loaded properly?
• Is silica gel inserted all the way at the specified location?
• Is the O-ring attached properly to the opening on the Case?
• Is there any dirt or foreign matter on the O-ring or the O-ring contact surface on the front lid?
• Is the waterproof function maintenance performed? (For details of the maintenance, see “Maintaining
the Waterproof Function” (P.20) of this manual.)
CAUTION:
• The silica gel bag will be caught when the Case is sealed and water leakage will occur.
• Once silica gel has been used, the moisture absorption performance will be impaired. Always replace the
silica gel when the Case is opened and closed.
2
3
PT-EP08_EN.Book Page 13 Friday, June 29, 2012 11:02 AM