Shooting
2
86
EN
Performing the sequential/self-timer shooting
Adjust settings for burst or self-timer photography. Choose an option according to your
subject. Other options, including anti-shock and silent modes, are also available.
1
Press the
j
Y
(
G
) button.
2
Use
HI
to select an option.
• Custom self-timer options can be viewed by pressing the
INFO
o
Single
Single-frame advance. The camera takes one photo each time
the shutter button is pressed all the way down.
T
Sequential High
The camera takes photos at up to about 8.7 fps while the
shutter button is held all the way down. Focus, exposure, and
white balance are locked at the values for the first shot in each
series.
S
Sequential Low
The camera takes photos at up to about 5 fps while the shutter
button is held all the way down. Focus and exposure conform
to the options selected for [
K
AFL] (P. 151). If [C-AF] or [C-AF+TR] is selected for [
K
AF
Mode], the camera will focus before each shot.
X
Y
12 sec
The shutter is released 12 s after the shutter button is pressed
all the way down. The self-timer lamp will light for about 10 s
and then start to flash about 2 s before the shutter is released.
The camera focuses when the shutter button is pressed
halfway.
Z
Y
2 sec
When the shutter button is pressed all the way down, the
self-timer lamp will start to flash and a photo will be taken after
about 2 seconds. The camera focuses when the shutter button
is pressed halfway.
c
Custom
Self-Timer
Adjust self-timer settings, including the self-timer delay and the
number of shots taken when the timer expires (P. 87).
t
S
(sample
icon)
Anti-Shock
r
Reduce the slight blur caused by shutter motion. Available in
single-frame, sequential low, and custom self-timer modes
♥
S
(sample
icon)
Silent
s
Take pictures with the electronic shutter. Use for shutter
speeds faster than 1/4000 s or in settings where the sound of
the shutter would be unwelcome. Available in single-frame,
sequential low, sequential high, and Custom self-timer modes.
In ♥
T
mode, focus, exposure, and white balance are locked
at the values for the first shot in each series. The flash sync
speed drops to 1/20 s (P. 88).
3
Press the
Q
button.
