Shooting
2
73
EN
Adjusting the degree of the art filter effect (
Fine-Tuning)
You can adjust the degree of the filter effect for Pop Art, Soft Focus, Pin Hole, Cross
Process, and Instant Film before taking pictures.
1
Select [Pop Art I/II], [Soft Focus], [Pin Hole I/II/
III], [Cross Process I/II], or [Instant Film] on the
art-filter-selection screen (P. 70).
• The slider will appear on the display.
•
Rotate the front dial to fine-tune the art filter.
• Touch controls can also be used.
•
The effect is visible in the display.
•
To reset the filter effect, press and hold the
Q
button.
Effect
Off
ART
1
ART
1
Pop Art
Slider
2
Press the
Q
button.
3
Shoot.
• Press the
u
button if you want to fine-tune the art filter again.
Using [Partial Color]
Record only selected hues in color.
1
Select [Partial Color I/II/III] in the art filter-
• A color ring appears in the display.
Effect
Off
ART
14
ART
14
Color
Color
Partial Color
2
Rotate the front dial to select a color.
•
The effect is visible in the display.
• Touch controls can also be used.
3
Press the
Q
button.
4
Shoot.
•
To choose a different color after shooting, press the
u
button.
