Olympus Panametrics Epoch 4 Plus, Руководство пользователя, Страница: 84 / 188

74
EPOCH 4PLUS
a. To avoid having to continuously use the [>] key when entering letters, an
automatic advance is built into the Alpha mode. This sequence does not apply
when editing data. Any letters that are not over the same key can be entered
directly and the cursor will automatically advance.
b. If two letters are over the same key, use the [>] key to advance the cursor. To
enter the word WELD, use the following sequence:
To enter delimiters (symbols), follow these steps:
Note: Delimiters or Symbols are treated as letters and are accessed in the Alpha
mode. Symbols are only valid when entering ID codes from the live screen.
1. Press [ALPHA] to enter symbols. The entry cursor flashes “__”.
2. Press [ID] (SYMBOL) multiple times to move through the following list:
[SPACE] [ . ] [ / ] [- ] [*] [:] [#].
8.4 Creating Files and Identifier (ID) Codes
Thickness readings and waveforms are stored in the EPOCH 4PLUS datalogger in a file
with an associated ID. You can either manually enter file names and IDs using the EPOCH
4PLUS keypad, or you can create them in the GageView PRO Interface Program and
download them to the instrument. Contact Olympus NDT or your local representative for
more information on the GageView PRO Interface Program.
You can create file names in the EPOCH 4PLUS Memory screen in preparation for saving
thickness readings and waveforms. On entering the memory screen, a cursor appears at the
first available empty file location. If the cursor is flashing over an existing file, use the
down arrow key to move to the next available empty file location. Enter the file name with
extension, date, time, and a short descriptive note using the alphanumeric keypad.
Figure 40 Entering File Information
The following rules and conditions apply:
W E L D
[Alpha] [9] [3] [3] [5] [5] [5] [3]