Olympus OmniScan SX, Руководство пользователя

Страница: 51 / 86

DMTA-20043-01EN [U8778624], Rev. B, May 2013
Basic Operation 43
3.4.2.7 Warnings on Battery Use
Carefully read and observe the following warnings on battery use.
• Do not open, crush, or perforate batteries; doing so could cause injury.
• Do not incinerate batteries. Keep batteries away from fire and other sources of
extreme heat. Exposing batteries to extreme heat (over 80 °C) could result in an
explosion or personal injury.
• Do not drop, hit, or otherwise abuse a battery, as doing so could expose the cell
contents, which are corrosive and explosive.
• Do not short-circuit the battery terminals. A short circuit could cause injury and
severe damage to a battery, making it unusable.
• Do not expose a battery to moisture or rain; doing so could cause an electric
shock.
• Only use the OmniScan SX or an external charger approved by Olympus to
charge the battery.
• Do not recharge a battery unless the indicators light up when the capacity check
button on the battery is pressed. Doing so could be dangerous.
• Do not store batteries that have less than 40 % remaining charge. Recharge
batteries to between 40 % and 80 % capacity before storing them.
• During storage, keep the battery charged to between 40 % and 80 %.
• Do not leave the battery in the OmniScan SX during instrument storage.
3.5 Peripheral Connection
This section explains the peripherals that can be used with the OmniScan SX.
Ferrite clamp filters
Before using the OmniScan SX, attach the ferrite clamp filters (supplied with the
OmniScan SX) to the peripheral cables that will be connected to the OmniScan SX
unit. The optional peripherals are as follows: