manualshive.com logo in svg

Olympus OmniScan SX, Руководство пользователя

Поделиться
Скачать
Olympus OmniScan SX Скачать руководство пользователя страница 17

DMTA-20043-01EN [U8778624], Rev. B, May 2013

Important Information — Please Read Before Use    9

 

Safety Signal Words

The following safety symbols might appear in the documentation of the instrument:

The DANGER signal word indicates an imminently hazardous situation. It calls 
attention to a procedure, practice, or the like, which, if not correctly performed or 
adhered to, could result in death or serious personal injury. Do not proceed beyond a 
DANGER signal word until the indicated conditions are fully understood and met.

The WARNING signal word indicates a potentially hazardous situation. It calls 
attention to a procedure, practice, or the like, which, if not correctly performed or 
adhered to, could result in death or serious personal injury. Do not proceed beyond a 
WARNING signal word until the indicated conditions are fully understood and met.

The CAUTION signal word indicates a potentially hazardous situation. It calls 
attention to an operating procedure, practice, or the like, which, if not correctly 
performed or adhered to, could result in minor or moderate personal injury, material 
damage, particularly to the product, destruction of part or all of the product, or loss of 
data. Do not proceed beyond a CAUTION signal word until the indicated conditions 
are fully understood and met.

Note Signal Words

The following safety symbols could appear in the documentation of the instrument:

The IMPORTANT signal word calls attention to a note that provides important 
information, or information essential to the completion of a task.

Содержание OmniScan SX























































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды