Olympus OmniScan MX2 Скачать руководство пользователя страница 85 | Manualshive

Страница: 85 / 228

Olympus OmniScan MX2 Скачать руководство пользователя страница 85

DMTA-20015-01EN [U8778402], Rev. J, January 2014

Introduction

73

Introduction

The OmniScan MX by Olympus is an innovative and portable multitechnology
nondestructive testing (NDT) instrument. It is suitable for a number of applications,
including tube inspection, weld inspection, and corrosion mapping.

The system supports any of the following NDT technologies: conventional ultrasonics
(UT); phased array ultrasonics (PA); conventional eddy current testing (ECT); and

eddy current array testing (ECA). Each of these technologies offers unique capabilities
and a level of performance previously unseen in an instrument of this size.

The OmniScan MX also doubles as an all-in-one instrument by virtue of its modular
design. Various modules are available, each with a particular inspection technology.

OmniScan MX Features

The OmniScan MX offers the following features:

•

Data storage and imaging

•

Conventional ultrasonic technology (UT)

•

Phased array ultrasonic technology (PA)

•

C-scan production

•

Real-time color display of the volume of a test part (sectorial scanning)

•

Up to 256 selectable A-scans per image

•

Conventional eddy current (ECT) and eddy current array (ECA) modules

«
...
83
84
85
86
87
...
»

Содержание OmniScan MX2





































































































































































































































Отзывы:

Нет отзывов