119
EN
Shooting Settings
4
Attaching Compatible Flash Units
The methods used to attach and operate external flash units vary with the unit. See
the documentation provided with the unit for details. The instructions here apply to the
FL-LM3.
#
Confirm that both the camera and flash unit are off. Attaching or removing a flash unit
while either the camera or flash unit is on could damage the equipment.
1
Remove the hot shoe cover and attach the flash.
•
Slide the flash in until the foot clicks into place at the
back of the shoe.
Hot shoe cover
2
Position the flash head for bounce-flash
photography or direct lighting.
•
The flash head can be rotated up and left or right.
•
Note that flash output may be insufficient for correct
exposure when bounce flash lighting is used.
3
Rotate the flash
ON/OFF
lever to the
ON
position.
• Rotate the lever to the
OFF
position when the flash is
not in use.
ON/OFF
lever