62
V
ie
w
ing pho
to
s
MR-F20 Series
The desired photo can be displayed on the m:robe start up screen.
1
Press the
button while the selecting photo screen is displayed.
2
Press the
button to select “Avatar,” then press the OK/EQ button.
3
Press the
button to select “On,” then press the OK/EQ button.
To cancel avatar
Select “Off” in step 3.
Setting Avatar
Notes
• Only the files in the AVATAR folder, when you set Avatar to on, are displayed.
• Only JPEG files in less than 96 × 96 pixels can be displayed.
• Only image files named from avatar00.jpg, avatar01 to avatar16.jpg can be set to Avatar (a maximum
of 17 files can be set).
MRF20_E.book Page 62 Tuesday, August 16, 2005 12:47 PM