64
6 Stereo measurement procedures (RX (stereo measurement function) only)
Measurement screen
Explanation of the measurement screen
List of messages displayed in the instruction message box
Message
Description
PUT M##
Specify measurement point number ## in the left image area.
PUT R##
Specify reference point number ## in the left image area.
Instruction message box
Shows instructions, conditions,
etc.
Object distance
The distance from the insertion
tube's distal end to the specified
measurement point is displayed.
The object distance mark (
) is
displayed in the following colors.
Up to 15 mm: Green
(Recommended mea-
surement distance)
Up to 30 mm: Yellow
(Possible measurement
distance)
30 mm and higher: Red
Cursor
Specifies a mea-
surement point or
reference point.
Point
Indicates a speci-
fied measure-
ment point or
reference point.
Displaying the
measurement
method
Corresponding point
Right image area
The three most recent mea-
surement results are displayed.
The object distance mark (
)
(see "Object distance") indi-
cates the object distance of
measurement point.
Left image area
